- Hjem
- Thruster
- Reservedele
- Andet
- Retract mechanical SRV300 Common
Andet
Retract mechanical SRV300 Common
Varenummer: 20 0651
38.236,45 €
(vejledende pris)
| Sparepart for | Value |
|---|---|
| Main products > Thrusters > DC > ERV | ERV300/300TC-48V ERV250/300TC-48V |
| Main products > Thrusters > Hydraulic > SRH | SRHP320/300TC-G16 |
| Main products > Thrusters > DC > SR_SRV_SRL | SRVP300/300TC SRV300/300TC |
Retract mechanical SRV300 Common
Guide til at navigere i reservedele
Nedenfor ser du det øverste niveau af reservedele til rådighed for dig. Hvis du ønsker en komponent i den præsenterede enhed, skal du klikke på navneetiketten under billedet for at komme til en detaljeret reservedelsliste for den enhed. Hvis der ikke er yderligere reservedele til rådighed, betyder det, at den pågældende enhed skal købes samlet på grund af service- eller installationskrav.
+
-
⇔
PHOTO NOT AVAILABLE
2
DIN 912 - M4 x 12
Antal: 4
Bolt,Unbraco
PHOTO NOT AVAILABLE
3
Cable actuator
Varenummer: 150050
Antal: 2
-1.png)
PHOTO NOT AVAILABLE
7
DIN 125 - A 13
Antal: 2
Washer
PHOTO NOT AVAILABLE
9
DIN EN ISO 1234 - 3,2x20
Antal: 4
Locking pin
PHOTO NOT AVAILABLE
10
Locking bolt
Varenummer: 140003
Antal: 2
PHOTO NOT AVAILABLE
11
DIN 913 - M4 x 20
Antal: 1
Threaded pin
PHOTO NOT AVAILABLE
12
DIN 985 - M4x0,7
Antal: 1
Lock Nut
PHOTO NOT AVAILABLE
14
M4 x 25 A4
Antal: 2
Phililps pan head screw
PHOTO NOT AVAILABLE
15
DIN 127 - A 4
Antal: 2
Spring Lock Washer
PHOTO NOT AVAILABLE
16
DIN 125 - A 4,3
Antal: 2
Flat Washer
PHOTO NOT AVAILABLE
18
ISO 10642 - M4 x 30
Antal: 2
Screw
PHOTO NOT AVAILABLE
20
Cable SRV/SRH 300
Varenummer: 150054
Antal: 1
1 Retract Horizontal Shaft Kit - 300mm
Below is a sub-level assembly of spare part groupings. If no additional spare parts are available,
it means that the current assembly group must be purchased as a whole due to service or installation requirements.
+
-
⇔
PHOTO NOT AVAILABLE
1
DIN 7991 - M4x12 A4
Antal: 4
Hex socket countersunk head cap screw
PHOTO NOT AVAILABLE
2
Parallel key DIN 6885
Varenummer: 140149
Antal: 4
PHOTO NOT AVAILABLE
3
Lifting arm PS
Varenummer: 135434
Antal: 1
PHOTO NOT AVAILABLE
4
DIN 125 - A 29
Varenummer: 115004
Antal: 2
PHOTO NOT AVAILABLE
6
Lifting arm SB
Varenummer: 135433
Antal: 1
PHOTO NOT AVAILABLE
7
Position marker
Varenummer: 140197
Antal: 1
PHOTO NOT AVAILABLE
8
DIN 912 - M5 x 8
Antal: 2
Bolt Unbraco
2 Upper vertical drive shaft kit SRV300
Below is a sub-level assembly of spare part groupings. If no additional spare parts are available,
it means that the current assembly group must be purchased as a whole due to service or installation requirements.
+
-
⇔
PHOTO NOT AVAILABLE
1
DIN 912 - M6 x 20
Antal: 1
Bolt, Unbraco
PHOTO NOT AVAILABLE
2
DIN 125 - A 6,4
Antal: 1
Flat Washer
PHOTO NOT AVAILABLE
3
Tool for ball bearing mounting
Varenummer: SM153210
Antal: 1
PHOTO NOT AVAILABLE
4
DIN 471 - 25x1,2
Varenummer: 113003
Antal: 1
PHOTO NOT AVAILABLE
5
SKF 2RS1W 61805-2RS1
Varenummer: SM-137108
Antal: 1
PHOTO NOT AVAILABLE
6
DIN 472 - 35 x 1,5
Varenummer: 6 2047
Antal: 1
PHOTO NOT AVAILABLE
7
DIN 3760 - AS - 25 x 35 x 7 - NBR - Stainless
Varenummer: SM155461
Antal: 2
PHOTO NOT AVAILABLE
8
Slide bearing
Varenummer: SM155182
Antal: 1
PHOTO NOT AVAILABLE
9
Vertical drive shaft Assembly
Varenummer: SM153092
Antal: 1
PHOTO NOT AVAILABLE
10
DIN EN ISO 1234 - 3,2x12
Antal: 1
Split lock pin
PHOTO NOT AVAILABLE
11
Lower drive shaft joint
Varenummer: 140837
Antal: 1
PHOTO NOT AVAILABLE
12
DIN 7 - 10 x 32 m6
Antal: 2
Parallel pin
PHOTO NOT AVAILABLE
13
DIN 6885 - A 6 x 6 x 20
Antal: 1
Key
PHOTO NOT AVAILABLE
14
Pin Ø8 L46,2
Varenummer: SM-143798
Antal: 1
3 Anode kit, aluminium aloy (Al-Zn-In)
Below is a sub-level assembly of spare part groupings. If no additional spare parts are available,
it means that the current assembly group must be purchased as a whole due to service or installation requirements.
+
-
⇔
PHOTO NOT AVAILABLE
1
Alu anode
Varenummer: 10 9998
Antal: 1
PHOTO NOT AVAILABLE
2
Bolt
Antal: 1
DIN 912 - M6 x 30
4 Tunnel kit retract Ø300mm TC, complete
Below is a sub-level assembly of spare part groupings. If no additional spare parts are available,
it means that the current assembly group must be purchased as a whole due to service or installation requirements.
+
-
⇔
PHOTO NOT AVAILABLE
1
DIN EN ISO 1234 - 3,2x20
Antal: 2
Split lock pin
PHOTO NOT AVAILABLE
2
DIN 3771 - 48,9 x 2,62 - NBR
Antal: 2
O-ring
PHOTO NOT AVAILABLE
3
Turn ring Ø45
Varenummer: 6 2140
Antal: 2
PHOTO NOT AVAILABLE
4
Wype Ring
Varenummer: 140030
Antal: 2
PHOTO NOT AVAILABLE
5
Tunnel bracket
Varenummer: 140833
Antal: 1
PHOTO NOT AVAILABLE
6
DIN EN ISO 1234 - 6,3x44
Antal: 2
Split lock pin
PHOTO NOT AVAILABLE
7
DIN EN ISO 1234 - 3,2x12
Antal: 1
Split lock pin
PHOTO NOT AVAILABLE
8
Ø8 x 46,2 mm
Antal: 1
Pin bolt
PHOTO NOT AVAILABLE
9
Lower drive shaft joint
Varenummer: 140837
Antal: 1
PHOTO NOT AVAILABLE
10
DIN 7 - 10 x 32 m6
Antal: 2
Parallel pin
PHOTO NOT AVAILABLE
11
O-ring 12,5 x 1,8
Antal: 1
O-ring
PHOTO NOT AVAILABLE
12
Blind plug
Varenummer: 75088
Antal: 1
PHOTO NOT AVAILABLE
14
Tunnel
Varenummer: 140803
Antal: 1
PHOTO NOT AVAILABLE
16
Bushing for drive pins
Varenummer: 140958
Antal: 1
5 Horizontal shaft sealing bushing kit
Below is a sub-level assembly of spare part groupings. If no additional spare parts are available,
it means that the current assembly group must be purchased as a whole due to service or installation requirements.
+
-
⇔
PHOTO NOT AVAILABLE
1
DIN EN ISO 1234 - 3,2x20
Varenummer: 113005
Antal: 2
PHOTO NOT AVAILABLE
2
Sleeve bearing Ø50 ø45 L50
Varenummer: 140060
Antal: 2
PHOTO NOT AVAILABLE
3
DIN 3771 - 48,9 x 2,62 - NBR
Varenummer: 6 2141
Antal: 2
PHOTO NOT AVAILABLE
4
Turn ring Ø45
Varenummer: 6 2140
Antal: 2
PHOTO NOT AVAILABLE
5
Wype Ring
Varenummer: 140030
Antal: 2
PHOTO NOT AVAILABLE
6
Sleeve bearing Ø32 Ø28 L20
Varenummer: 140019
Antal: 2
PHOTO NOT AVAILABLE
7
Thrust Washer Ø48 Ø28 W=1,5 8Igludur X)
Varenummer: 140020
Antal: 4
PHOTO NOT AVAILABLE
8
DIN EN ISO 1234 - 6,3x44 (A4)
Varenummer: 113006
Antal: 2
PHOTO NOT AVAILABLE
9
Pin Ø8 L46,2
Varenummer: SM-143798
Antal: 1
PHOTO NOT AVAILABLE
10
DIN EN ISO 1234 - 3,2x12 (A4)
Varenummer: 103012
Antal: 1
6 Retract ring kit Ø300mm
Below is a sub-level assembly of spare part groupings. If no additional spare parts are available,
it means that the current assembly group must be purchased as a whole due to service or installation requirements.
+
-
⇔
PHOTO NOT AVAILABLE
1
Sleeve bearing
Varenummer: 140024
Antal: 2
PHOTO NOT AVAILABLE
2
Thrust washer
Varenummer: 6 2083
Antal: 4
PHOTO NOT AVAILABLE
3
DIN 933 - M10 x 20 (A4)
Antal: 2
Hex Head Bolt
PHOTO NOT AVAILABLE
5
DIN 934 - M10 (A4)
Antal: 8
Nut
PHOTO NOT AVAILABLE
6
DIN 7991 - M10x70 A4
Antal: 4
Hexagon socket countersunk head cap screws
PHOTO NOT AVAILABLE
7
Connecting rod
Varenummer: 140807
Antal: 2
PHOTO NOT AVAILABLE
8
Twist ring
Varenummer: 140763
Antal: 2
PHOTO NOT AVAILABLE
9
DIN 125 - A 10,5 (A4)
Antal: 6
Washer
PHOTO NOT AVAILABLE
10
DIN 985 - M10x1,5 (A4)
Antal: 6
Lock Nut
7 Gearleg SRV300 replacement kit
Below is a sub-level assembly of spare part groupings. If no additional spare parts are available,
it means that the current assembly group must be purchased as a whole due to service or installation requirements.
+
-
⇔
PHOTO NOT AVAILABLE
4
Bushing for drive pins
Varenummer: 140958
Antal: 1
8 Gearleg SRV300TC w/out propeller
Below is a sub-level assembly of spare part groupings. If no additional spare parts are available,
it means that the current assembly group must be purchased as a whole due to service or installation requirements.
+
-
⇔
PHOTO NOT AVAILABLE
1
DIN 912 - M10 x 60
Antal: 2
Bolt, Unbraco
PHOTO NOT AVAILABLE
2
DIN 127 - A 10
Antal: 2
Spring lock washer
PHOTO NOT AVAILABLE
3
DIN 125 - A 10,5
Antal: 2
Washer
PHOTO NOT AVAILABLE
5
Bolt w/copper gasket
Varenummer: 10 1220
Antal: 1
PHOTO NOT AVAILABLE
7
DIN 125 - A 17
Antal: 2
Washer
PHOTO NOT AVAILABLE
8
DIN 985 - M16x2
Antal: 2
Lock Nut
9 Service kit retract 300mm
Below is a sub-level assembly of spare part groupings. If no additional spare parts are available,
it means that the current assembly group must be purchased as a whole due to service or installation requirements.
+
-
⇔
PHOTO NOT AVAILABLE
1
Wyper ring
Varenummer: 141063
Antal: 1
PHOTO NOT AVAILABLE
2
O-ring 41,28x3,53
Antal: 1
--
PHOTO NOT AVAILABLE
3
DIN 3760 - AS - 40 x 50 x 7 - NBR - Stainless
Varenummer: SM167034
Antal: 2
PHOTO NOT AVAILABLE
4
Inverted Internal Circlip DIN 5008 50x2
Varenummer: 141265
Antal: 1
PHOTO NOT AVAILABLE
5
O-ring Ø50x4
Antal: 2
--
Ansvarsfraskrivelse
Sleipners garantier gælder kun, hvis der anvendes originale reservedele. Installatøren har eneansvaret for monteringen af reservedelene. Monter ikke reservedele, medmindre du har fuld viden og kompetence. Hvis reservedelen er monteret forkert, er Sleipner Group ikke ansvarlig for eventuelle skader, der måtte opstå.
Oplysningerne i dokumentet var korrekte på tidspunktet for offentliggørelsen. Sleipner Group påtager sig dog ikke ansvar for eventuelle fejl eller udeladelser. Løbende produktforbedringer kan ændre produktspecifikationerne uden varsel. Sleipner Group kan derfor ikke tage ansvar for eventuelle forskelle mellem produkt og dokument.
-
A legacy that commits
We’ve lived and worked with the unruly sea for a hundred years. That’s why we develop important features that enables a boat to handle the sea better – that enable you to enjoy your boat, at anchor and at full speed. That is why you wanted a boat, isn’t it?
-
Beautiful engineering
The technology in our solutions is world-class. We know, because we’ve developed it ourselves, just as we manufacture every solution, and follow them until their fixed to a hull, ourselves. This meticulous attention to detail is why your day out always will be better with a Sleipner aboard.
-
Worldwide service
We take pride in our solutions’ function throughout their lifespan. So, we never really let them out of sight, even when they’ve left for distant shores. Our global network is there to ensure continuous optimal function. You know what you get with a Sleipner, today and tomorrow.